SICAM Protocol Test System

Please note: 
Download for personal test is free, but recording is limited to a maximum of 50 messages.
Experience full function after buying and registration of the software.

Basic installation: 
IEC 60870-5-101 
balanced (point to point traffic, symmetrical) simulation, monitoring 
unbalanced (MP-Traffic, non-symmetrical) simulation, monitoring 
SAT PCBE (FW-Typ: 08) balanced (point to point traffic, symmetrical) monitoring 
SAT PCBU SSI (FW-Typ: 24) balanced (point to point traffic, symmetrical) monitoring 
Optional: 
IEC 60870-5-103 unbalanced (MP-Traffic, non-symmetrical) simulation, monitoring 
IEC 60870-5-104 simulation and monitoring 
Additional external hardware for
monitoring and simulation of two communication lines (TxD & RxD) with only one serial interface on the PC (useful on Notebooks without additional PC-Card for a second COM-Port). 
time taging with a resolution of 1ms 
up to 64 kbps 
V.24/V.28 interface 
X.24/X.27 interface (V.11) 
internal or external clock (isochrone connections) 
logic analyser 
base cable set for the use with external hardware or notebooks 
Isochrone connections: The bit timing will be seperated transmitted, it is synchron to the data. It can be generated by itīs own, or from an external source. 
Monitoring of point-to-point (blanced) or multipoint (unbalanced) lines. 
Displaying of clear text of messages including quality bits and time tagging. 
Import of clear text information via CSV format. 
Statistic information (number of bytes, messages, errors,...). 
Additional display of messages via HEX-code. 
Simulation of messages 
Storage of monitoring information for offline analyses. 
System requirements: 
Windows NT 4.0 128 MB 
Windows 2000 256 MB 
Windows XP 256 MB 
Windows Vista 1 GB
min. 50 MB free HD-Disk space